China Professional Trailer Axle 12ton Axle Tube Without Drum with high quality

Product Description

Product Description

MaHangZhou CZPT Technology Co., Ltd. has the capacity to guarantee the quality for every step, from raw material (forging), then heating treatment, finally machining. We have our own forging mill, heating teatment shop and machining shop. At present we could supply various of lage main axles and shaft, turbin shaft, cylinder shaft, windy generator shaft, roller shaft, wheel forging, drill bit forging and kinds of irregular parts based on the drawing provided by customers.

Steel material for shaft and forging parts:
 

Engineering Steel  
GB
GB/T 700
JIS
JIS G3101
DIN (W-Nr.)
EN10571-2 / DIN17100
AISI/ASTM
ASTM A36
BS OTHERS
Q235B SS400 S235JR / RST37-2 A36    
Q235C   S235J0 / ST37-3 U      
Q235D   S235J2      
GB
GB/T1591
JIS DIN (W-Nr.)
EN10571-2 / DIN17100
AISI/ASTM BS OTHERS
Q355B   S355JR      
Q355C   S355J0 / ST52-3U      
Q355D   S355J2 / ST52-3 N      
Q355E   S355K2      
GB
GB/T 699
JIS
JIS G4051
DIN (W-Nr.)
EN 10083-2
AISI/ASTM
ASTM A20
BS OTHERS
      1018 EN2C  
20 S20C C20 1571 EN3B/070M20 ASTM A105
35 S35C C30 1035    
45 S45C C45E/1.1191 1045 EN8D/080M40  
50 S50C C50/1.1206 1050 080M50  
55 S55C C55 1055 EN9/070M55  
GB
GB/T 3077
JIS
JIS G4105/JIS G4103
DIN (W-Nr.)
EN 15710
AISI/ASTM
ASTM A29
BS
BS 970
OTHERS
40Cr SCr440 41Cr4(1.7035) 5140    
15CrMo SCM415 16CrMo44/1.7337      
20CrMo SCM420 18CrMo4/1.7243 4118    
30CrMo SCM430 25CrMo4/1.7218 4130 708A25/708M25  
42CrMo SCM440 42crmo4/1.7225 4140 EN19/709M40  
  SCM445   4145    
40CrNiMoA SNCM 439/SNCM8 36CrNiMo4/1.6511 4340 EN24/817M40  
    40NiMoCr10-5/1.6745   EN26/826M40  
    34CrNiMo6 / 1.6582 4337    
    30CrNiMo16-6/1.6747 4330V EN30B/835M30  
    32CrMo12/1.7361   EN40B/722M24  
16CrMnH / 20CrMnTi   16MnCr5 / 1.7131 5115    
20CrMn   20MnCr5 / 1.7147      
    15CrNi6/1.5919 3115    
    16NiCr4/1.5714   EN351/637M17  
      4615/4617 EN34/665M17  
    14NiCr14/1.5752 3310/3415 EN36/655M13  
    15NiCrMo16-5/1.6723   EN39/835M15  
17CrNiMo6   18CrNiMo7-6 (1.6587) 4815    
20CrNiMo SNCM220 1.6523/21NiCrMo2 8620 805M20  
    20CrNiMo5   EN353  
GCr15 SUJ2 52100/1.3505   EN31/535A99  
38CrMoAl SACM645 41CrAlMo7/34CrAlMo5   905M39/905M31 41CrAlMo74(ISO)

 

High quality AISI 4140 forging steel shaft

AISI 4140 forging steel shaft,machined shaft , long shaft, stainless steel shaft ,axis, spindle,
We King Rail were already engaged in exporting steel railway wheels , axles ,bearings and other forging products for about 12 years, materials are a great variety of hot forged, hot rolled and cold drawn Steels,  including engineering steel, cold work tool steel, hot work tool steel, plastic mold steel, spring steel, high speed steel, stainless steel etc., besides King Rail also has their own heating treatment shop and machining shop to provide heating treatment, cutting and further machining service.

Since 2012 year,  we has the right to export all FORGED STEEL behalf of MaHangZhou CZPT Technology Co., Ltd. which is specialized in melting and forging of special steel since 1965 year, now King Rail is 1 of the biggest manufacturer of forged product in China.The forged products are used in Automotive, Aerospace, Power Generation, Oil & Gas, Transportation and Industrial. 

Till 2013 year, many customers need HOT ROLLED and COLD DRAWN steel from Masteel Industrial, in order to provide one-stop solution to our customers,  began to cooperate with Xihu (West Lake) Dis.bei Special Steel (HangZhou and HangZhou mill), Baosteel, Tiangong International, Changcheng Special Steel for hot rolled tool steel, cooperate with HangZhou Speical Steel, HangZhou HangZhou Speical Steel, Shagang Group, CZPT Group for hot rolled engineering steel. Now we already set up the warehouse in ZheJiang and ZheJiang City, more than 20000 tons ex-stock could be supplied with kinds of sizes.

Then from 2018 year, King Rail decide to provide further manufacturer processing service, at present we could supply various of lage main shaft, turbin shaft, cylinder shaft, windy generator shaft, roller shaft, wheel forging, drill bit forging and kinds of irregular parts based on the drawing provided by customers.

King Rail  is the professional one-stop steel manufacturer and trader, stockist and exporter in China, our customers spread all over the world, include West Europe, North America, South America, Asia, Middle Asia, Africa, Australia, etc.

The company owns advanced special steel smelting facilities and forging processing equipments, the main steel-making equipment include 2 sets of 50t ultra-high power electric arc furnaces,2 sets of 60t LF refining furnaces,1 set of 60t vacuum degassing refining CZPT and 4 sets of 1-20t electroslag re-melting furnaces.
The main forging equipments mainly include:3 sets of 5t electro-hydraulic hammers, 1 set of high-speed forging units of 800t,1600t,2000t and 4500t respectively.

 

Advantages of US
Competitive price with high quality. over 15 sets automatic lathe, drilling, cutting etc.  Customized size and spec /OEM available.  Near ZheJiang port with convenient transportation.  Short lead time (7-15days depends on order qty). 

For Further Information, Please Contact Me Here Now!

Worm Shafts and Gearboxes

If you have a gearbox, you may be wondering what the best Worm Shaft is for your application. There are several things to consider, including the Concave shape, Number of threads, and Lubrication. This article will explain each factor and help you choose the right Worm Shaft for your gearbox. There are many options available on the market, so don’t hesitate to shop around. If you are new to the world of gearboxes, read on to learn more about this popular type of gearbox.
worm shaft

Concave shape

The geometry of a worm gear varies considerably depending on its manufacturer and its intended use. Early worms had a basic profile that resembled a screw thread and could be chased on a lathe. Later, tools with a straight sided g-angle were developed to produce threads that were parallel to the worm’s axis. Grinding was also developed to improve the finish of worm threads and minimize distortions that occur with hardening.
To select a worm with the proper geometry, the diameter of the worm gear must be in the same unit as the worm’s shaft. Once the basic profile of the worm gear is determined, the worm gear teeth can be specified. The calculation also involves an angle for the worm shaft to prevent it from overheating. The angle of the worm shaft should be as close to the vertical axis as possible.
Double-enveloping worm gears, on the other hand, do not have a throat around the worm. They are helical gears with a straight worm shaft. Since the teeth of the worm are in contact with each other, they produce significant friction. Unlike double-enveloping worm gears, non-throated worm gears are more compact and can handle smaller loads. They are also easy to manufacture.
The worm gears of different manufacturers offer many advantages. For instance, worm gears are 1 of the most efficient ways to increase torque, while lower-quality materials like bronze are difficult to lubricate. Worm gears also have a low failure rate because they allow for considerable leeway in the design process. Despite the differences between the 2 standards, the overall performance of a worm gear system is the same.
The cone-shaped worm is another type. This is a technological scheme that combines a straight worm shaft with a concave arc. The concave arc is also a useful utility model. Worms with this shape have more than 3 contacts at the same time, which means they can reduce a large diameter without excessive wear. It is also a relatively low-cost model.
worm shaft

Thread pattern

A good worm gear requires a perfect thread pattern. There are a few key parameters that determine how good a thread pattern is. Firstly, the threading pattern must be ACME-threaded. If this is not possible, the thread must be made with straight sides. Then, the linear pitch of the “worm” must be the same as the circular pitch of the corresponding worm wheel. In simple terms, this means the pitch of the “worm” is the same as the circular pitch of the worm wheel. A quick-change gearbox is usually used with this type of worm gear. Alternatively, lead-screw change gears are used instead of a quick-change gear box. The pitch of a worm gear equals the helix angle of a screw.
A worm gear’s axial pitch must match the circular pitch of a gear with a higher axial pitch. The circular pitch is the distance between the points of teeth on the worm, while the axial pitch is the distance between the worm’s teeth. Another factor is the worm’s lead angle. The angle between the pitch cylinder and worm shaft is called its lead angle, and the higher the lead angle, the greater the efficiency of a gear.
Worm gear tooth geometry varies depending on the manufacturer and intended use. In early worms, threading resembled the thread on a screw, and was easily chased using a lathe. Later, grinding improved worm thread finishes and minimized distortions from hardening. As a result, today, most worm gears have a thread pattern corresponding to their size. When selecting a worm gear, make sure to check for the number of threads before purchasing it.
A worm gear’s threading is crucial in its operation. Worm teeth are typically cylindrical, and are arranged in a pattern similar to screw or nut threads. Worm teeth are often formed on an axis of perpendicular compared to their parallel counterparts. Because of this, they have greater torque than their spur gear counterparts. Moreover, the gearing has a low output speed and high torque.

Number of threads

Different types of worm gears use different numbers of threads on their planetary gears. A single threaded worm gear should not be used with a double-threaded worm. A single-threaded worm gear should be used with a single-threaded worm. Single-threaded worms are more effective for speed reduction than double-threaded ones.
The number of threads on a worm’s shaft is a ratio that compares the pitch diameter and number of teeth. In general, worms have 1,2,4 threads, but some have three, five, or six. Counting thread starts can help you determine the number of threads on a worm. A single-threaded worm has fewer threads than a multiple-threaded worm, but a multi-threaded worm will have more threads than a mono-threaded planetary gear.
To measure the number of threads on a worm shaft, a small fixture with 2 ground faces is used. The worm must be removed from its housing so that the finished thread area can be inspected. After identifying the number of threads, simple measurements of the worm’s outside diameter and thread depth are taken. Once the worm has been accounted for, a cast of the tooth space is made using epoxy material. The casting is moulded between the 2 tooth flanks. The V-block fixture rests against the outside diameter of the worm.
The circular pitch of a worm and its axial pitch must match the circular pitch of a larger gear. The axial pitch of a worm is the distance between the points of the teeth on a worm’s pitch diameter. The lead of a thread is the distance a thread travels in 1 revolution. The lead angle is the tangent to the helix of a thread on a cylinder.
The worm gear’s speed transmission ratio is based on the number of threads. A worm gear with a high ratio can be easily reduced in 1 step by using a set of worm gears. However, a multi-thread worm will have more than 2 threads. The worm gear is also more efficient than single-threaded gears. And a worm gear with a high ratio will allow the motor to be used in a variety of applications.
worm shaft

Lubrication

The lubrication of a worm gear is particularly challenging, due to its friction and high sliding contact force. Fortunately, there are several options for lubricants, such as compounded oils. Compounded oils are mineral-based lubricants formulated with 10 percent or more fatty acid, rust and oxidation inhibitors, and other additives. This combination results in improved lubricity, reduced friction, and lower sliding wear.
When choosing a lubricant for a worm shaft, make sure the product’s viscosity is right for the type of gearing used. A low viscosity will make the gearbox difficult to actuate and rotate. Worm gears also undergo a greater sliding motion than rolling motion, so grease must be able to migrate evenly throughout the gearbox. Repeated sliding motions will push the grease away from the contact zone.
Another consideration is the backlash of the gears. Worm gears have high gear ratios, sometimes 300:1. This is important for power applications, but is at the same time inefficient. Worm gears can generate heat during the sliding motion, so a high-quality lubricant is essential. This type of lubricant will reduce heat and ensure optimal performance. The following tips will help you choose the right lubricant for your worm gear.
In low-speed applications, a grease lubricant may be sufficient. In higher-speed applications, it’s best to apply a synthetic lubricant to prevent premature failure and tooth wear. In both cases, lubricant choice depends on the tangential and rotational speed. It is important to follow manufacturer’s guidelines regarding the choice of lubricant. But remember that lubricant choice is not an easy task.

China Professional Trailer Axle 12ton Axle Tube Without Drum   with high qualityChina Professional Trailer Axle 12ton Axle Tube Without Drum   with high quality